If neither options are available, install a RE621 Touchpad Range Extender. If the signal strength displayed is less than 35, relocate the Touchpad or Connect+ panel. Once a network is determined, verify the signal strength.(Internet access allows for camera control, weather updates, and the ability to modify users.) The Touchpad can be connected to either the Wi-Fi DeviceLink card or the home router for internet access. If the “Connect” option is not available, press “Setup” then “Factory Default”. Select the “Connect” option to see the available networks.Power the Touchpad by applying AC power.Identify your network and verify signal strength before mounting it permanently. The touchpad can be mounted on a wall or tabletop.ģ. Reconnect the panel’s AC power and backup battery.Ģ.Install the Wi-Fi DeviceLink card in Slot 2 by carefully aligning the nylon retention posts and the 8-pin connector while pushing the card firmly until all posts are fully seated.Disconnect the panel’s AC power and backup battery.Confirm the panel has a Wi-Fi DeviceLink card installed Encrypted, Connect+ and BAT-Connect enabled, battery-backed Wi-Fi™ connection Installation Overview for Connect+ġ.Provides local control of security and automation functionality.Many central stations have a direct Internet communication to Alula, while others that do not will utilize dial-up communications to the central station’s alarm receiver. Signals are processed by Alula and then re-transmitted to the central station. Q: Which is better, a hardwire or WiFi Internet connection?Ī: Hardwire is always better because of the possibility of the WiFi disconnecting on a replacement of the customer’s router/gateway.Ī: The BAT-WiFi is single-path. Q: What is the warranty on the BAT-Connect?Ī: Alula’s Limited Warranty is to repair or replace the device for five years, which warranty is the best in the industry. The BAT-Connect has both a Ethernet hardwire connection and a WiFi connection in case Ethernet wiring is difficult or impossible to run. First is the WiFi to connect from the BAT-Connect to the customer’s WiFi gateway, and second is the WiFi that supports the Touchpads. Q: The BAT-Connect has WiFi capability, how does this work?Ī: The BAT-Connect actually has two seperate WiFi features. The amounts depend on the volume of business a company does with Alula, where the wholesale charges are very competitive with similar services in the marketplace. Charges are for (1) Alarm Relay, (2) Cameras and (3) Home Automation. Q: What are the charges for Internet and Cellular service through Alula?Ī: Once you become a dealer, registration of the device can be easily made through Alula’s portal, even through Alula’s app using a smartphone. Q: I am new to Alula and want to get started, what is the first step?Ī: Click on the ‘Become a Dealer’ tab at the top of the page. The Internet is primary and auto-switchable to Cellular in the event the signal fails. Q: How are alarm signals transmitted from the alarm site?Ī: The BAT-Connect is dual-path. It is a good idea to have at least one remote antenna in inventory in case you need it.Ī: For compatible alarm control panels, the BAT-Connect will auto-program the alarm control using the keypad bus connection, programming the necessary fields for the alarm transmissions and virtual keypad. However, if the installation is in a building that is blocking cellular signal or in a remote location where cellular signal is weak, the remote antenna may be necessary. Q: Do I need to order the external antenna?Ī: Most installations do not require an external antenna. Being connected to the Internet, via a Virtual Keypad connection through the Alula Security App, the alarm and home automation commands are very fast, usually responding in just one second. Q: How fast does the Virtual Keypad react to commands?Ī: Alula utilizes the Internet as a primary source of communication, and Cellular as a back-up. See the Compatibility Chart for full details. The BAT-Connect is connected by using a 4-conductor wire to the keypad bus. Q: What panels are supported for the Virtual Keypad feature?Ī: Most DSC, Honeywell and GE panels are supported. Q: What alarm control panels does the BAT-Connect work with?Ī: The BAT-Connect is universal, as it proves a ‘dialer capture’ for panels that transmit Contact ID format from the dialer output.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |